type: Formulation-en

Microfluidizer LM 20, Microfluidics

  • Microfluidizer LM20 Processor is designed for the high-performance micromixing of emulsions and dispersions in a variety of industries.  It achieves size reduction/disruption performance at lower process pressure.
  • Recommended for:

–         Emulsions

–         Dispersions

–         Liposomes

–         Cell Disruption

–         Fine Particle Deagglomeration

 

  • 2  parameters allow size reduction :

–         Impact – collision: occurring when the high velocity product stream impinges upon itself.

–         High shear rates: deformation of the product stream; occurring from contact with channel walls at high velocity.

  • Maximum pressure: 2050 bars – 30 000 psi.
  • Minimum volume : 14mL
Filed under: Formulation

FREEZE DRYING CRYONEXT

  • Number of shelf : 3 (usable shelf area: 1000cm2).
  • Shelf temperature and heating rate: -50°C to +50°C and 1.5°C/min.
  • Trap cooled to -85 °C.
  • Ice capacity: 3 kg.
  • control of the process by software.
  • locking products under vacuum or inert gas.
  • Separated trap by isolation valve.
  • Vacuum measurement: capacitance probe MKS BARATRON and PIRANI.
  • 8 T-type thermocouples sensors
  • Number of shelf: 4 (usable shelf area: 1.3 m2)
  • Shelf temperature and heating rate: -50°C to +50°C and 1.5°C/min.
  • Ice capacity: 8kg.
  • Trap cooled to -85°C.
  • Vacuum measurement: capacitance probe (MKS BARATRON) and Pirani (TYRACONT type VSP 63).
  • 2 cooling stages (compressors).
  • 3 thermocouples sensors.
  • control of the process by software

 

Filed under: Formulation